This product is designed to remove lime deposits and limescale from all hard, non-absorptive acid-resistant surfaces, especially ceramic tiles. This limescale remover gets rid of all stubborn mineral deposits and brightens up and cleans grout between the tiles. The limescale remover is in the form of a gel to limit the release of vapours and to better adhere to vertical surfaces.

On small surfaces apply in a thin layer onto dirty spots with a sponge or a pad; with floors apply the product from the canister and spread with a mop, pad on a pole, or with disc machine. Leave to act for 5 to 20 minutes, depending on the degree of dirt. Work in sections, apply to an area approx. 2–5 m2 and then wipe off. The process of dissolving deposits can be speeded up mechanically. Then rinse a few times with plenty of water. Vertical surfaces can also be cleaned using a spray with a foamer. Dilute the limescale remover with water at the ratio of 1:1 and spray walls with a thick foam. Leave to act for a while, wipe with a pad, and rinse off with plenty of water. Thinner layers of limescale can be removed by wiping them with a mop soaked in a 1–2% solution of the limescale remover. Do not leave to act for more than 20 minutes; if the layer is thick, the process can be repeated several times. Do not use on limestone-like surfaces (e.g. teraco, marble, travertine, sandstone), or on shiny or artificial stone. Do not use on aluminium, wood, laminates. Not suitable on stainless surfaces (it darkens them) and chrome-plated parts of taps; rinse off affected areas with water.