Note: Avoid contact with aluminium. Do not use the product for purposes other than specified.

 

Application:

The product must be poured directly into the drains. Avoid contact with the product and with sink, bath, or metal, etc. Pour the recommeneded amount of the product slowly and gradually into the drain and leave it to react as per the specified table. Then (after 15 to 30 minutes) rinse with large amounts of water. During handling, use protective rubber gloves, protect eyes and face with protective shield. Do not put your face above cleaned drains. When the product stops pouring out of the bottle, do not close it but place it in vertical position in order to allow the air to get inside. The product is not designed for periodic cleaning. However, it is possible to use half a dose once a week for preventative purposes. If the stuck location (drain block) is between the outlet and the siphon, such block must be mechanically removed prior to using CLEAMEN 242 drains alkaline. If this procedure is not observed accurately (i.e. slowly and gradually pour the specified dose only in the drains), the solution of the agent and water may potentially bubble back and damage the surface around the inlet, particularly coloured plastic materials and enamel! DO NOT POUR AROUND THE DRAIN! It is necessary that the drain pipes have sufficient outlet descent in order to prevent the product from remaining in the pipes.

 

	dose in ml according to the size of the pipe
dosage	small pipe	kitchen drain	Toiletes and cleaning drains
dose ( ml )	150	250	500
time (min.)	15	25	30

pH of concentrate :  14 

The agent has recently been equipped with a safety top with an insert for restricting the flow.